Jul 14, 2021
Recommended for HiWatt 2 or other high-power applications or when long cable length required (for best EMI immunity).
The USB-ISO-485 is an industrial-grade, bi-directional, USB-powered, 2500V opto-isolated USB to RS485 / RS422 adapter, which makes a half-duplex RS485 or a full-duplex RS422 available to a PC via the USB port.
The USB-ISO-485 optical isolation protects the USB from voltage surges, lightning strikes, GND loops and noise conditions from the RS485 / RS422 port. It has an RJ-45 female connector, db-9 male connector on the RS485 / RS422 port with optional included six position terminal block, and a USB type A female on the USB port.
The USB-ISO-485 uses the latest FTDI chipset and is fully compatible with Windows 10 (32 / 64), Windows 8.1 (32 / 64), Windows 8 (32 / 64), Windows 7 (32 / 64), Vista (32 / 64), Server 2012, Server 2008 R2, Server 2008, Server 2003, XP (32 / 64), 2000, 98Se, CE, Mac 8 / 9 / X, Linux and Android.
Features:
- Plug-and-Play (hot-pluggable)
- Adds one RS-485 / RS-422 port using one USB port
- Provides 2500Vrms isolation
- RJ-45, DB9 or included terminal block
- USB 1.1 and 2.0 compatible
- Port powered; no external power needed
- Supports 300 bps–128,000 bps rates
- 6’ (2m) cable for convenience
- Power / Transmit / Receive LED indicators
- Data direction auto-turnaround; no flow control necessary
- Internal 128 / 385-byte TX / RX buffers
- No IRQs, IO, DMA required; no IRQ conflicts
- USB cable, terminal block and easy-to-install drivers included
- Built-in 600W surge and 15KV static protection
- 5-year manufacturer’s warranty
- RoHS, CE and FCC compliance certified
Jul 14, 2021
This converter can be used with the IntelliRay, IntelliRay Quad or SkyBeam units. Note that since the IntelliRay units do not have a dedicated 9 pin DSUB RS232 to directly connect to this converter, the UV0525 IntelliRay 15 pin to 9 pin RS232 adapter cable will be needed.
The USB-232-1 is a port-powered, bi-directional USB to RS232 adapter / converter that can be used to convert any standard USB port (USB 2.0 – backward compatible) into a RS232C port and vice versa. This high-quality, high-performance USB to RS232 adapter / converter uses the latest FTDI chipset and is fully compatible with Windows 10, Windows 8, Windows 7 / Vista / XP / Server2008 / Server2003 / 2000 / 98 (32-bit), Windows 10, Windows 8, Windows 7 / Vista / XP / Server2008 / Server2003 (64-bit), Win CE, Mac, Linux, and Raspberry Pi. The unit comes with a USB type A male connector on the USB side and a DB9 male connector on the RS232 side.
FEATURES:
- Compatibility: USB 2.0 (backward compatible) and EIA/TIA RS-232C standard
- Power Source: Port power from USB port
- Current Consumption: Less than 100mA
- Cable length: 3.3ft (1m)
- Baud Rates: 300 to 128,000bps (Auto-sensing & Self-adjusting)
- Distance: USB side: 10ft (3m); RS232 side: 16ft (5m)
- Connector: USB side: Type A Male; RS-232 side: DB-9 Male
- LEDs: TX, RX, and Power
- Dimensions (H x W x D): 0.6 x 1.4 x 2.2 in (15 x 35 x 55 mm) (excluding cable)
- Weight: 2.6 oz (73 g)
- Operating Temperature: 32ºF to 95ºF (0ºC to 35ºC)
- Operating Humidity: Up to 90% RH (no condensation)
Jul 14, 2021
(Recommended for use with Intelliray, IntelliRay Quad and SkyRay 800 systems when short cable lengths are used. For longer distances or electrical noisy environments, see the isolated UV3384 RS485 converter)
The USB-485-1 is a port-powered, bi-directional, integrated USB to RS485 adapter / converter that can be used to convert any standard full-duplex USB port into a two-wire balanced half-duplex RS485 port and vice versa. The unit can be used to communicate with one loop of up to 256 units of RS485 devices and it comes with a built-in selectable 120-Ohm terminator for system reliability and easy installation.
This USB to RS485 adapter / converter is powered from the USB port and it supports data auto-sensing & self-adjusting, therefore, no baud rate setting is required. And with the data direction auto-turnaround technology, no external power or flow control is required for RS485 communications. The USB to RS485 adapter / converter uses the latest FTDI chipset and is fully compatible with Windows 10 / 8 / 7 / Vista / XP / Server2008 / Server2003 / 2000 / 98 (32-bit), Windows 10 / 8 / 7 / Vista / XP / Server2008 / Server2003 (64-bit), Win CE, Mac, and Linux.
FEATURES:
- USB to 2-wire RS485 adapter / converter.
- Adds one RS-485 port to your USB port.
- Communicate with one loop of up to 256 units of RS485 devices.
- 300 to 3M Baud operation (auto-sensing and self-adjusting).
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation.
- Built-in 15kV ESD static and circuit protection.
- Data direction auto-turnaround, no flow control is required.
- Supports Windows 10 / 8 / 7 / Vista / XP / Server2008 / Server2003 / 2000 / 98 (32-bit), Windows 10 / 8 / 7 / Vista / XP / Server2008 / Server2003 (64-bit), Win CE, Mac, and Linux.
- Supports remote wakeup and power management.
- Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
- Port-powered, no external power required.
- No IRQs required, no IRQ conflicts.
- Surface Mount Technology manufactured to RoHS and ISO-9001 standards.
- Safety: Strictly certified by world-class lab SGS / TUV (Cert No. E1/2013/90010C; E1/2013/90011C).
- 5-year manufacturer’s warranty
